Window Repair – Easy and Cheap Ways to Keep the Elements Out

A broken window detracts from your home’s look and compromises its security and insulation. Luckily, there are a few easy ways to fix it temporarily until you can have a professional examine the issue.

Clear super glue can be applied to a cracked window to fill it and make it less visible. This is especially useful for cracks caused by pressure changes. Contact Window Repair Naperville now!

A pebble kicked up by the lawnmower, a favorite vase knocked over by a playful cat, or even just normal age and wear can cause the glass to crack. These cracks aren’t a problem if they don’t spread, but you’ll need to take action quickly if they do. Whether you’re dealing with a single-window pane or multiple, many easy and cheap ways to fix cracked windows will keep the elements out.

First, thoroughly clean the area around the crack. This will help you see the crack clearly and reduce chances of it worsening when you’re working with epoxy.

Next, prepare your workspace for the repair. If you’re working with a two-part epoxy, mix the resin and hardener together on a cardboard sheet or paper plate in a well-ventilated area and as directed on the product package. Once the epoxy has been mixed, you’ll have only five to ten minutes to apply it to the window before it begins to dry.

There are a number of different options for applying the epoxy to your broken window. Masking tape and duct tape will work for most cases, but the best option is to use a thick clear plastic cover. This will accomplish two important things: it will prevent the crack from spreading and it will create a seal that keeps cold or warm air from entering your home through the windows.

Another option is to use a glass glue that is designed for vehicle windows. This can be bought online or at a local automotive repair store and applied as directed. It is a little more labor intensive than simply using tape but it will be stronger and more attractive once applied to the window.

You can also try to fuse the glass back together with a glass welding kit, but this will require extremely high temperatures and a kiln, which makes it a less than ideal DIY solution. If you’re not comfortable trying these methods to repair a cracked window or if the cracks are too big, contact a professional window repair company.

Fixing a Cracked Pane of Glass

If a crack in the window glass of your home has appeared, it’s important to act as soon as possible. Untreated, these cracks can spread and jeopardize the structural integrity of the window. They can also interfere with the insulating properties of double- or triple-pane windows, potentially costing you money on your energy bills.

Fortunately, there are several quick and easy fixes that can help you keep your window intact until you can have it fixed more permanently.

One of the most effective ways to temporarily fix a cracked pane of glass is to use a strong-hold adhesive. You can find a variety of different glass glues online and at auto maintenance stores. Follow the manufacturer’s instructions to apply the adhesive, making sure that the crack is completely covered and dries thoroughly.

Another option is to apply a piece of plastic over the crack. This solution is less attractive, but it can help prevent a gust of wind or stray debris from causing additional damage to the pane. This will also keep drafts and insects out of your home while you wait for a more permanent solution.

The last temporary fix for a cracked pane of window glass is to use a sealant designed for use on windows. You can buy this type of product online or at most hardware and department stores. Using a putty knife, apply the sealant to the edges of the window glass and frame, filling the gap and covering the crack. Once the sealant dries, you can reinstall the window into its frame.

If you’re dealing with a large crack in the window, it may be best to call a professional for a more permanent repair. The expert will be able to analyze the severity of the crack and determine its cause. Ideally, this will allow them to make changes to the structure of your window that will prevent cracks from occurring in the future. The specialist may also be able to recommend a type of glass that is better suited for the climate in your area.

Fixing a Broken Pane of Glass

A rogue baseball, a pebble thrown by your lawnmower or a heavy storm can shatter a windowpane in your home. Unless you have double-pane windows with an insulated gas layer between the glass, these breakages leave your home exposed to the elements and increase the chance of further cracking. A few simple tools and a little patience can save you the cost of an expensive window replacement service and allow you to repair your broken pane of glass on your own in a couple of hours.

Start by carefully prying away the trim and glazing putty that hold the old pane in place. Old-fashioned windows will also have glazing points, small metal pieces with sharp points pushed into the wood to hold the glass in place. These can be pried out with a screwdriver.

Once you have the old pane out, measure the width and length of the rabbets that hold the glass and subtract 1/8 inch in each direction. That will ensure that the new pane is sized just right for a snug fit. You can buy a piece of replacement glass cut to the exact dimensions you measured in most hardware stores.

Set the new pane into place in the rabbets, being careful not to wiggle or jostle it too much. Fill the gap between the new glass and frame with a small amount of caulk. The caulk will help keep water out and air in, as well as provide a seal that keeps the glass in place.

If you have a single-pane window, the above fix will work temporarily, but it’s best to plan on full window replacement later on. A good quality replacement window will be far more energy efficient than a single-pane and will make your house look better, too.

Clear super glue like Loctite will work as a less permanent fix for a cracked windowpane. It won’t strengthen the glass or make it any more durable, but it will keep the crack from spreading until you can afford to replace the window. It’s important to use caution and wear eye protection when applying super glue.

Getting Started

Windows are one of the most important parts of any home. They let in natural light, open to views and are a gateway to the outside world. Keeping up with window repair is essential for ensuring they continue to function properly and prevent leaks and air infiltration. When homeowners notice a problem, they should jump on it quickly to minimize damage and avoid expensive repairs in the future.

Whether it’s chipped paint or a drafty window that’s letting in frigid temperatures, a few simple steps can fix the issue. First, the homeowner should remove any curtains or blinds hanging from the window and clear the workspace to ensure a smooth and safe process. Then, they can lay down a drop cloth or sheet for protection and make sure the window can be opened fully for ventilation.

After clearing away any debris, the homeowner should begin cleaning the glass surface with a damp cloth to remove any dirt and dust. They can then mix a two-part epoxy on a disposable surface, such as a piece of paper or cardboard, and follow the instructions to create a strong adhesive that fills in the cracks. When the epoxy is dry, the professional can add a new seal to restore the window’s aesthetic.

Another common window repair is fixing a damaged screen frame. Often, these frames will develop wood rot or moisture problems, causing them to become damaged and allowing moisture to enter the house. This can be a serious problem and is best caught early on before it spreads, which may mean that the entire frame must be replaced. For this type of damage, epoxy wood filler is usually all that’s needed.

Other issues that can occur include sashes that are difficult to raise or lower and broken spring balances on older windows. In these cases, the professional might recommend replacing the entire window to prevent further damage.

When it comes to repairing windows, the key is always to act fast. Leaving a window in disrepair can lead to further damage and even safety hazards for the family. Luckily, by following these tips and hiring a professional window company that follows strict safety protocols, homeowners can rest assured that their windows will continue to provide years of quality service.